钟山PLC自动化培训学校,钟山PLC自动化培训班,钟山PLC自动化学校

钟山PLC自动化培训学校文章前言：为您提供全面的钟山学PLC自动化的学校，钟山PLC自动化培训哪里好，钟山PLC自动化培训学校，钟山PLC自动化短期培训班，钟山PLC自动化培训学校地址，钟山学PLC自动化培训，钟山PLC自动化培训哪里好，钟山PLC自动化培训班，钟山PLC自动化技术培训信息以及钟山PLC自动化培训学校和钟山PLC自动化培训班最新资讯，湖南阳光PLC自动化培训学校，常年面向钟山地区开设PLC自动化培训班，是专业的钟山PLC自动化学校，常年面向钟山地区招生，热忱欢迎钟山地区的PLC自动化技术求学者来我校学习最专业的PLC自动化技术。 ，钟山PLC自动化培训学校，钟山PLC自动化培训班，钟山PLC自动化学校

钟山PLC自动化培训班文章内容：

Submitted by wickedvishi on Tue, 2007-10-16 02:50.

i am new to PLC. i know about programming using ladder logic. i am good in that but i dont know anything about working with AB plc. how to load the program?
how to configure the PLC?
all together i can say i know hw to build up the logic, but dont know how to implement it..
i request you to help me in any way possible.

thanx
vishi

Submitted by cjrobertso on Thu, 2007-11-22 15:16.

I am assuming you are talking about RSLOGIX 500. This software serves The SLC 500 family, as well as micrologix PLC's, the RSLOGIX 5 is used for PLC 5 systems. It is almost Identical to RSLOGIX 500.
The primary PLC configuration takes place in the I/O configuration. There are also channel configuratios, but those usually don't need to be used in a PLC that doesn't need to communicate with other PLC's or computers. The micrologix generally doesn't need much other than for you to select the processor. For an SLC 500, you will need to configure what cards are in which slots. If you don't, and load the Program to the processor, the processor will fault. Double click the I/O configuration to open the window. If you are connected to the PLC, you can choose read I/O config. If not select the card from the list, and drag it to the appropriate slot. Not sure what the model of module card you have, power down the PLC, remove the card and look on the side. The information may also be found inside the door.

If you can tell me which processor you have, I can tell you how to connect to it.

I have a decent amount of experience with the SLC 500, Micrologix, and the PLC 5. If you have any questions about these, I am happy to help

Calvin Robertson,

Maintenance Electrician-Longview Fibre, and Automation Geek

Submitted by ramu on Fri, 2008-02-29 10:48.

hello sir,
iam ramu from india.I was new to ab plc but i have some idea about logic in messung& mistubishi plcs. i want to know all the detail in full about to do programes in ab softwares. so please guide me.

my mail id: siddani_ramu@yahoo.co.in

trlrao

hiiiiiiiii i need

Submitted by eswari (not verified) on Fri, 2009-06-05 01:00.

hiiiiiiiii

i need u r help.im also bining lerner to this PLC.i want to know the floating point concept in a plc.please help me regarding this.thanQ

Submitted by Anonymous (not verified) on Sun, 2010-12-19 11:19.

floating is generally used in analog system...........
e.g temp., pressure etc etc.....
it has to be then converted in 4-20ma
or very rarely taken 0-20ma.......
hope I made uh clear!!!!!!

Submitted by brentize on Tue, 2008-09-16 06:37.

Hi Calvin How are you? I want to us what is the different of RSLOGIC500 to RSLOGIC5000? I want to study PLC and please help me to decide which PLC is easy to learn and to understand, Im a B.S computer engr. and I dont know where to start, Like I said, can you help me to decide to which PLC I will focus Siemens PLC or AB PLC. Thank you.

Brentize

Brentize@yahoo.com

Submitted by ZAREI.GH on Tue, 2008-10-21 07:29.

HI
I DIDN'T WORK BY AB BUT SIEMENS.
IT IS EASY TO LEARN AND USE SIEMENS PLC.
ALSO YOU CAN LEARN FROM SIEMENS WEBSITE AND USEFUL BOOKS ARE PUBLISHED.

Submitted by sr (not verified) on Sat, 2008-10-25 17:29.

its better to start with AB ... its more user friendly .... may siemens has more complicated features but it is not as easy as AB both to program n to trouble shoot n understand ...

Submitted by brentize on Thu, 2009-04-02 14:16.

ANY MANUALS OR WEBSITE TO LEAR MORE ABOUT LADDER LOGIC? IM FOCUSING TO LEARN MORE ABOUT AB PLC. PLEASE HELP ME.

THANKS.
BRENTIZE@YAHOO.COM

Submitted by plc programming (not verified) on Fri, 2011-04-29 12:04.

On this website are manuals about PLC programming with Step7. You can learn online.

Submitted by Mayur (not verified) on Mon, 2011-11-14 07:02.

Pleas

Submitted by ILLUSTATOR (not verified) on Wed, 2011-03-30 13:18.

ACTUALLY I ALSO RECOMMEND YOU TO USE AB BECAUSE SIMENS PLC ARE MORE COMPLICATED TO USE BUT IT HAS WIDE RAGE OF FEATURE AND COMMUNICATION IS ALSO EASY IN THIS WITH PROFIBUS.

Submitted by suiresh (not verified) on Thu, 2008-10-30 00:36.

Allen Bradley Programming SW is easy so you can us only ab plc

Submitted by IVAN LIMIN (not verified) on Mon, 2009-04-27 05:26.

THE AB RSLOGIX500 IS 'BASICALLY' ALL LADDER LOGIC AND IS A GOOD STARTING POINT FOR BEGINNERS WHILE THE AB RSLOGIX5000 UTILISES FUNCTION BLOCK DIAGRAMS AS WELL AS LADDER LOGIC BUILT INTO SUBROUTINES....START OFF WITH THE 500 SERIES UNTIL YOU GET MORE COMFORTABLE.

IVAN LIMIN

Submitted by antts (not verified) on Sat, 2009-06-06 10:05.

please give me a example,I want to konw how to make masterdrive commucation with ABPLC500,I need your help.Tkanks!

Submitted by ILLUSTATOR (not verified) on Wed, 2011-03-30 13:23.

TRY WITH PROFIBUS PROTOCOL IT MAY USEFULL.
OR GO FOR MODBUS (IT HAS LIMITED FEATURES)

Submitted by CORAGEM MACHOCO (not verified) on Sun, 2011-08-14 08:46.

Hi,
1st: you must know that Rslogix is not a PLC. Rslogix is a software required to program a Allen Bradley PLC.
The difference is: RSLOGIX500 is to program small PLCs like Microllogix1100,SLC500, while RSLOGIX 5000 is to program the smallest PLCs.I advice you to start with SLC500, but remember that the secret to program well any PLC you must undesrtand the structure of that PLC,otherwise it will becomes quite difficult.
Best Regrds,
Coragem Machoco.
Automation Engineer.

Submitted by Fidel O. Aragon (not verified) on Sat, 2008-10-04 04:31.

Dear Sir,
I am interested to learn about PLC. Right now i don't know where i am going to start. Please help me.

I am hoping your positive reply.

HI YOU MUST START FROM

Submitted by ZAREI.GH on Tue, 2008-10-21 07:32.

HI
YOU MUST START FROM DIGITAL AND LOGICS.
THEN LADDER AND FBD OR STL AND ....

Submitted by R.Giri (not verified) on Wed, 2012-02-22 01:28.

Dear Sir,

I Have Finished BE(ECE).I am interested to Learn about PLC But Confusion for taken Coures Allen Bradley or Siemens can You Please Help me

Submitted by amit sutar (not verified) on Wed, 2012-08-15 16:06.

hello sir i am amit ,i interested to learn about PLC,i dont know how to start a ladder.some symbol also confusing .so you plese guide me & send a simple program of plc ladder & specifications

Submitted by Sanjiv Anto (not verified) on Mon, 2009-11-09 04:04.

can u please tell me abt d Allen Bradley PLC serieses in detail....?

Submitted by Samirpe (not verified) on Tue, 2010-01-12 05:17.

Could you please explain me more about the configuration and trouble shooting of SLC 500 and PLC 5.Thanking you for your consideration.

Submitted by DROX (not verified) on Mon, 2010-07-12 19:37.

Hi! I need help with my micrologix 1500.
How can I delete the program inside and replace it with my new program?Because when I upload the new program, still the old program will show up.
thank you.

Submitted by Alan (not verified) on Tue, 2010-09-14 07:02.

Calvin,

I need advice for a specific one that you can recommend.
This is the experiment scenario: There will be a special battery charger that
charges only
Lithium ion batteries (I have that already). There will be two banks or sets
of
batteries. Only one bank can be charged at a time, once the first bank is
fully
charged, then the 'controller' or 'PLC' will switch the battery charger to the
second
bank to charge that one as well. The system that I'm experimenting will drain
each bank one at a time. I want the controller to determined when a bank is
drained then it will switch the battery charger to the second battery bank.
This will happen back and forth. While one is discharged the other is being
charged. The batteries will be 24V DC.

Submitted by Sebastian (not verified) on Mon, 2010-12-20 22:53.

I'm enrolling in allen brady plc proramming class in chullora tafe. If youu can sugguest a tutoral program to help me in the beginning of this course.
Thankyou very much, hope to hear from you soon.

Sebastian

Submitted by subhash (not verified) on Sat, 2011-11-26 08:29.

hello sir,

I am now learning PLC & SCADA.
please send me some example of situation which occurs in the industry , i will send back its programing logic to you.Please guide me if there will any mistake.

Submitted by Barry (not verified) on Sun, 2011-12-11 22:44.

Can you tell me why my plc keeps shutting off my servo on a tree cnc mill, sometimes it will run for days without doing it, and then at times I can reset the servo and it will kick right back off, sometime I can mill an hr or so and just kicks off the servos.
can you help
cell 936 641 8846

Barry

thanks

Submitted by Anonymous (not verified) on Tue, 2012-08-28 20:43.

Can you Please help me about ab PLC 5 my question are

How to down load the program in plc ?
How to use force the input ?

Submitted by Rajini (not verified) on Fri, 2012-11-02 18:07.

Calvin,

Do you provide SLC 500 programming service? If yes, let me know as we are in need of a programmer who can set up SLC 500 system.

If you have experience designing a SLC 500 system using a small plant design drawing, please let me know.

Thanks
Rajini

Submitted by sureshkiran (not verified) on Sat, 2009-08-01 06:08.

hello sir
i am sureshkiran from india (salem)i am very happy to be a part of your guidence, sir i am learning AB,AB SCADA at present but further i would like to learn ABB,SIEMENCE,keeyance sorry sir if u found any spell mistake .. our trainer gave a required matter in AB.although they did not tell anything deaply... i am not underestimate their skills but i want more sir please help me how to work out the plc and which matterials much beter, if u have any free on line books sent me sir ...

. thankyou very much

Submitted by mohammad reza on Thu, 2009-11-12 01:24.

hi;
please if you know about delta agency in dubai , give me the website or add of that.
im waiting...
thanks.

Submitted by Anonymous (not verified) on Fri, 2012-06-01 06:13.

i will tell u later

Submitted by Shivaprasad.B.M (not verified) on Sat, 2008-08-30 06:42.

i am working in Bangalore,India.....i don't know about PLC....i am intrested in learn plc....can u help to learn PLC....

Submitted by osman (not verified) on Sun, 2008-09-14 06:26.

Iworking in SUDAN ,idont know about PLC .Iam intersted in learn PLC can u help learn PLC
osman ohamed omer

Submitted by ajithkumar (not verified) on Mon, 2010-02-01 09:31.

learn plc more details

Submitted by EMMANUEL AGOMOH (not verified) on Thu, 2010-06-24 11:16.

PLEASE SIR WE WANT THESE ITEM TO BUY. THE ONES WE HAVE AT THE MOMENT HAS CPU PROBLEM.IF THE CPUs CAN BE REPAIRED, THEN WE CAN SEND THEM FOR REPAIRS.

Submitted by bipind (not verified) on Sat, 2011-10-01 05:54.

Hi Shivaprasad.B.M

I have a book for plc program and hardware as well as
If you need pl contact on this mail
i am in australia
Thanks
Bipin

Submitted by Anonymous (not verified) on Thu, 2012-05-17 00:22.

hi dear
I'm Hoji. I see yo have the PLc book is PDF , if is may please send for me

thanks alot

Submitted by Richard Mondejar on Wed, 2008-10-29 11:01.

hi, I want to have a cd disc for programming and simulating, for me to practise diagramming. Where can I get this?

Submitted by kanon (not verified) on Fri, 2009-06-12 12:40.

how can i get software of ab for learning plc.

Submitted by Er. Vipin gopal (not verified) on Sat, 2009-11-21 03:02.

yes i hav the simulator cd als hav the rslinx ;rs logix500;relogic emulator and licence key ...als hav some other good tutorials related to AB;ABB;siemens;modicon....
als if u want to knw more abt the job and job opening in the related field u can feel free to contact me....

thanks
Er. Vipin gopal
B.TECH;CEH;MS

Submitted by Anonymous on Sun, 2009-12-06 12:27.

i have good knowledge of plc how can i get good job ,currentely i m working in tyre plant as maintainance engg. i want to enter as automation engg,how can i get it ,please help me.i have 3 yrs exp.

Submitted by Anonymous (not verified) on Thu, 2012-05-17 00:26.

Hi Dear
I'm Hoji ,i'm student in university i have a project this term may you help me ,i have to make some thing with PLC about what i work is better what is your idea ?

Thanks alot
hoji

Submitted by Anonymous on Sun, 2009-12-06 12:29.

i have good knowledge of plc how can i get good job ,currentely i m working in tyre plant as maintainance engg. i want to enter as automation engg,how can i get it ,please help me.i have 3 yrs exp.

Submitted by Ben (not verified) on Fri, 2010-02-05 16:49.

I am interested in learning about AB PLC's. If you have a simulator CD and any other tutorial material that you can share with me I Would be greatfull. Please Email me. benyanasak@yahoo.com

Submitted by Bhaskar (not verified) on Mon, 2010-02-22 15:36.

Hi Vipin,
Where and how should I contact you ?

take care,
Bhaskar

Submitted by Amit00000 (not verified) on Sat, 2010-03-06 13:27.

Well this is amit an instrumentation engineer. I working with a company who has a large set up of siemens PLCs Drives and SCADA. I am looking for some knowledge with RSLogix 500 and RSLogix 5000. can you provide me the activations keys for same in free.

If u want any software with lecense for siemens free of cost you can contact me.

Regards

Amit

Submitted by Anonymous (not verified) on Tue, 2011-03-15 11:23.

I would like to have a siemens S7 language, with key, can you help me?

Submitted by bipind (not verified) on Sat, 2011-10-01 05:50.

Hi Amit
My name is bipin from australia.
You said about plc software.
I need Ab and siemens PlC software if you have pl contact on this e mail.
Bipin

。钟山PLC自动化培训学校，钟山PLC自动化培训班，钟山PLC自动化学校，钟山学PLC自动化的学校，钟山PLC自动化培训哪里好，钟山PLC自动化培训学校，钟山PLC自动化短期培训班，钟山PLC自动化培训学校地址，钟山学PLC自动化培训，钟山PLC自动化培训哪里好，钟山PLC自动化培训班，钟山PLC自动化技术培训.(编辑:hnygdzxx888)

钟山PLC自动化学校延伸阅读： 。钟山PLC自动化培训学校，钟山PLC自动化培训班，钟山PLC自动化学校，钟山学PLC自动化的学校，钟山PLC自动化培训哪里好，钟山PLC自动化培训学校，钟山PLC自动化短期培训班，钟山PLC自动化培训学校地址，钟山学PLC自动化培训，钟山PLC自动化培训哪里好，钟山PLC自动化培训班，钟山PLC自动化技术培训.

(整理：钟山PLC自动化培训学校)